Un sistema de construcción para climas tropicales basado en pórticos arriostrados de bambú

Autores/as

  • J. Echeverria Santa Clara University
  • C. Sampson Kiewit Infrastructure West Company
  • J. Vargas Devcon Construction
  • T. Nilsson Santa Clara University
  • L. M. Gil-Martin University of Granada
  • M. Aschheim Santa Clara University

DOI:

https://doi.org/10.3989/ic.13.122

Palabras clave:

Construcción ecológica, pórtico dúctil de bamboo, pasador corrugado

Resumen


En este artículo se presenta un sistema de construcción de viviendas de bajo coste para países tropicales en los cuales existe riesgo sísmico. Los objetivos de este trabajo son generar bajo impacto medioambiental (incluyendo las emisiones de carbono), empleo de materiales locales, preferiblemente reciclados, y mano de obra local. Para esta construcción se han empleado bloques de hormigón de baja resistencia (con agregado reciclado) junto con un innovador sistema de pórticos de bambú, botellas de plástico, vigas de bambú y cubiertas de chapa. El comportamiento dúctil de la estructura se garantiza introduciendo una barra de acero en la base del pórtico de bambú. Para proteger el bambú de la humedad, el pórtico se monta sobre un zócalo. Los resultados experimentales y analíticos obtenidos se utilizan para el diseño estructural del sistema frente a cargas de viento y sísmicas.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

(1) EERI. (May, 2010). The Mw 7.0 Haiti Earthquake of January 12, 2010: Report #2, EERI. Special Earthquake Report. Earthquake Engineering Research Institute.

(2) DesRoches, R. R., Kurtis, K. E., Gresham, J. J. (2011). Breaking the reconstruction logjam: Haiti urged to recycle concrete rubble. American Ceramic Society Bulletin, 90(1): 20-26.

(3) Federal Research Division. (May, 2006). Country Profile: Haiti. Federal Research Division-Library of Congress. http://lcweb2.loc.gov/frd/cs/profiles/Haiti.pdf.

(4) USAID. (April, 2010). Emergency Market Mapping and Analysis: The Market for Agricultural Labor in Sud-Est Department of Haiti. MicroReport #165. United States Agency for International Development.

(5) Vance, E.D., Maguire, D. A., Zalesny Jr., R. S. (June, 2010). Research Strategies for Increasing Productivity of Intensively Managed Forest Plantations. Journal of Forestry, pp. 183-192.

(6) Blatner, K.A., Cohn, P. J., Fight, R. D. (2010). Returns from Management of Noble Fir Stands for Bough Production and Sawtimber. Western Journal of Applied Forestry, 25(2): 68-72.

(7) Marcklinger, C. J. (2011). Community Environmental Preservation Initiative in Borgne, Haiti. FIU Electronic Thesis and Dissertations, Paper 403.

(8) Perez, M. R., Belcher, B., Maoyi, F., Xiasheng, Y. (2003). Forestry, poverty, and rural development: perspectives from the bamboo subsector. En Hyde, W. F., Xu, J., Belcher, B. (Eds.) China’s Forests: Global Lessons from Market Reforms, (pp. 151-176). Washington D.C.: Resources for the Future and CIFOR.

(9) Van Der Lugt, P. (2005). The bamboo sector in Colombia and Ecuador: a state of the art analysis of opportunities and constraints. Journal of Bamboo and Rattan, 4(4): 421-440.

(10) Riano, N.M., Londono, X., Lopez, Y., Gomez, J.H. (2002). Plant growth and biomass distribution on Guadua angustifolia Kunth in relation to ageing in the Valle Del Cauca - Columbia. Bamboo Science and Culture: The Journal of the American Bamboo Society, 16(1): 43-51.

(11) Trujillo, D. J. A. (6-9 September, 2009). Axially Loaded Connections in Guadua Bamboo. In Proceedings of the International Conference on Non-conventional Materials and Technologies. Bath, UK.

(12) Lopez, D. P. (2009). Desarrollo de un Sistema de Construcción a partir de estructuras en Guadua. Medellín, Colombia: Universidad EAFIT - Ingeniería de Diseño de Producto.

(13) BME Capstone Design Group. (2011). Bamboo wikispaces. Arizona State University. http://bamboo.wikispaces.asu.edu/4.+Bamboo+Properties.

(14) Rottke, E. (6 June, 2003). Bambus Engineering Reports/Mechanical Properties. http://bambus.rwth-aachen.de/eng/reports/mechanical_properties/referat2.html.

(15) Frankel, A., Harmsen, S, Mueller, C., Haase, J. (2010). Documentation for the Initial Seismic Hazards Maps for Haiti, Open File Report 2010-1067, U.S. Geological Survey. http://pubs.usgs.gov/of/2010/1067/.

(16) Aschheim, M., Black, E. (2000). Yield Point Spectra for Seismic Design and Rehabilitation. Earthquake Spectra, Earthquake Engineering Research Institute, 16(2):317-335.

(17) AASHTO. (2012). AASHTO Guide Specification for LRFD Seismic Bridge Design, 2nd Edition (2011 with 2012 interim revisions). Washington, D.C.: American Association of State Highway and Transportation Officials.

(18) Caltrans SDC. (2010). Caltrans Seismic Design Criteria version 1.6. Sacramento, California: California Department of Transportation.

(19) FEMA 440. (June, 2005). Improvement of Nonlinear Static Seismic Analysis Procedures. Report FEMA-440. Washington: Federal Emergency Management Agency.

(20) Echeverria, J., Sampson, C., Vargas, J., Nilsson, T., Gil-Martin, L. M., Aschheim, M. (June, 2013). Development of a Seismic-Resistant Bamboo Braced Frame System for Resisting Earthquakes in Tropical Climates. In 2nd International Congress on Mechanical Models in Structural Engineering. Granada, Spain.

Publicado

2014-12-30

Cómo citar

Echeverria, J., Sampson, C., Vargas, J., Nilsson, T., Gil-Martin, L. M., & Aschheim, M. (2014). Un sistema de construcción para climas tropicales basado en pórticos arriostrados de bambú. Informes De La Construcción, 66(Extra-1), m019. https://doi.org/10.3989/ic.13.122

Número

Sección

Artículos