Dos décadas de estructuras plegadas de hormigón. Inicio y ocaso de un movimiento

Autores/as

  • R. García Universidad Politécnica de Madrid

DOI:

https://doi.org/10.3989/ic.11.083

Palabras clave:

Hormigón, láminas, plegadas, pliegues, estructuras

Resumen


En este trabajo se trata de la evolución y realizaciones más destacadas con estructuras formadas por plegaduras o facetas de hormigón armado. Se indagan los orígenes de su cálculo y aplicaciones y se ofrece una panorámica de lo realizado entre 1950 y 1970. Estas dos décadas dieron lugar a una gran concentración de literatura técnica y publicaciones al respecto, para decaer rápidamente poco después. Singularmente, puede certificarse su final, al menos simbólico, con un destacado Congreso de la IASS celebrado en 1970 y dedicado expresamente a estructuras plegadas. Pasadas más de cuatro décadas desde las últimas grandes estructuras de este tipo, parecía pertinente realizar una revisión de sus logros y de las posibles causas de su decadencia. Esto es pertinente dado que, desde hace algunos años, se aprecia un renovado interés por las geometrías facetadas y de plegaduras.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

(1) Angerer, Fred. (1972). Construcción laminar. Elementos y estructuración. 51, Gustavo Gili, Barcelona. (Bauten mit tragenden flächen konstruktion und gestaltung, 1960).

(2) Faber, Colin. (1970). Las estructuras de Félix Candela. p. 23, Compañía editorial continental, México, España, Argentina, Chile (Candela, Shell Builder, 1963).

(3) Kramer, Kimberly Waggle. (2005). Survey of Prestressed / Post-Tensioned Folded Plate Shells for Roof Structures in the United States: 1950-1970. Ned H. Burns Symposium on Historical Innovations in Prestressed Concrete, eds. Bruce W. Russell and Shawn P. Gross (Michigan: American Concrete Institute-SP 231), p. 70. PMid:15808550 PMCid:2475493

(4) Kramer, Kimberly Waggle. (2005). Survey of Prestressed / Post-Tensioned Folded Plate Shells for Roof Structures in the United States: 1950-1970. Ned H. Burns Symposium on Historical Innovations in Prestressed Concrete, eds. Bruce W. Russell and Shawn P. Gross (Michigan: American Concrete Institute-SP 231), p. 76.

(5) Staufer, A., Bonomo, R. (2006). Lichtraumfaltwerk. Steildachexperimente in den 50er un 60er Jahren. Werk, Bauen+Wohnen, (4): 28-35.

(6) García, R. (2006). Concrete folded plate structures in the Netherlands. Proceedings of the Second International Congress of History of the Construction, Cambridge, pp. 1189-1208

(7) Láminas plegadas de hormigón armado. Realizaciones en España, Actas del V Congreso Nacional de Historia de la Construcción. (2007). Burgos, pp. 367-378.

(8) Wilby, C. B. (1998). Concrete folded plate roofs. Arnold, London, p. 20. El artículo citado es: G. Ehlers. (1930). Die Spannungsmittlung in Flächentragwerken. Beton und Eisen 29, pp. 281-286, 291-296.

(9) Winter, George y Pei, Minglung. (1947). Hipped Plate Construction. Journal of the American Concrete Institute, 18(5): 505-506. El artículo citado de Craemer es: Craemer, H. (1930). Allgemeine Theorie der Faltwerke. Beton und Eisen, (29): 276-81.

(10) Wilby, C. B. (1998). Concrete folded plate roofs. Arnold, London, pp. 20, 23 y 24.

(11) G. de Kazinsky. (1948). Die Berechnung der Faltwerke nach dem Traglastverfahren. Proceedings 3rd Congress, IABSE, Liege, pp. 615-621.

(12) Raymond, A. y Rado, L. L. (1962). Centro musical Gunma. Informes de la construcción, (144), sin paginar.

(13) Gruber, E. (1932). Berechnung prismatisher Scheibenwerke. Memoires, Association Internationale des Ponts et Charpentes, (1): 225-241.

(14) Kramer, Kimberly Waggle. (2005). Survey of Prestressed / Post-Tensioned Folded Plate Shells for Roof Structures in the United States: 1950-1970. Ned H. Burns Symposium on Historical Innovations in Prestressed Concrete, eds. Bruce W. Russell and Shawn P. Gross (Michigan: American Concrete Institute-SP 231), p. 66.

(15) Ketchum, M. Memoirs 4. Folded Plates, (c. 1990), www.ketchum.org/shellpix. html (visitado 30 dic. 2009).

(16) Overzicht Nederlandsche schaalconstructies. Cement, (1961), p. 440.

(17) Winter, George y Pei, Minglung. (1947). Hipped Plate Construction. Journal of the American Concrete Institute, 18(5): 522.

(18) Winter, George y Pei, Minglung. (1947). Hipped Plate Construction. Journal of the American Concrete Institute, 18(5): 519-521.

(19) Concrete Roof of Novel Design for San Francisco Warehouse. Engineering News-Record, (1936), p. 558.

(20) Arup, Ove N.: Shell Construction. Yearbook for 1946-Architecture in Ireland, Dublin, Royal Institute of the Architects of Ireland.

(21) Faber, Colin. (1970). Las estructuras de Félix Candela. Compañía editorial continental, México, España, Argentina, Chile (Candela, Shell Builder, 1963). pp. 69-73.

(22) Agencia alquiler automóviles Nash, Anzures, D.F. con F. Fernández, (demolida). Faber. Félix Candela, p.64.

(23) Faber, Colin. (1970). Las estructuras de Félix Candela. Compañía editorial continental, México, España, Argentina, Chile (Candela, Shell Builder, 1963). pp.65, 67.

(24) Faber, Colin. (1970). Las estructuras de Félix Candela. Compañía editorial continental, México, España, Argentina, Chile (Candela, Shell Builder, 1963). p. 68.

(25) Lundgren, H. 1945). Stabiliteitsforsøg med cylindriske jernbetonskaller. Ingeniørvidenskabelige skrifter, n.º 5, Copenhage. Publicado después en Lundgren, H. (1951). Cylindrical shells, Danish Technical Press, Copenhagen.

(26) Cassinello, F. (1974 ). Construcción: Hormigonería. Ed. Rueda, Madrid, p. 537.

(27) Ketchum, Milo S. (1955). Design and Construction of a Folded Plate Roof Structure. Journal of the American Concrete Institute, 26(5): 449-455.

(28) Folded plate shell concrete roofs. Architectural Forum, (1955), pp. 156-57, en donde además de a Winter y Pei como referencias para los cálculos cita también a Ibrahim Gaasfar, Hipped Plate Analysis, Considering Joint Displacements, ASCE, Vol. 79, (April 1953).

(29) Kramer. Folded Plate Shells, p. 69

(30) Driskell, John J. (1957). Multispan Prestressed Folded Plate Roof for Langendorf Bakery, Journal of the American Concrete Institute, 29(2): 115-125.

(31) Prestressed Folded Plate Roofs a Gym. Architectural Record (junio, 1961), pp. 172-74.

(32) Koncz, Tihamer L. (1970). Prestressed Precast Folded Plates for Industrial Buildings. IASS Symposium, vol. 1, pp. 3, 6 (orden correlativo, no paginado)

(33) Harry, Walter C. (1963). Precast Folded Plates Become Standard Products. Journal of the American Concrete Institute 60(10): 1375.

(34) Weiβbach, K. (1970). Manufacturing of VT-Folds y Ku.hn, E. Construction and Application of VT-Folds, ambos en IASS Symposium, vol.2, Vienna.

(35) Mihul, A. (1970). Prismatic Roofs of Prestressed Concrete. IASS Symposium, vol. 2, Vienna.

(36) Engel, H. (2000). Sistemas de estructuras. Gustavo Gili, Barcelona (ed. original alemán 1967), pp. 219-29

(37) Angerer, Fred. (1972). Construcción laminar. Elementos y estructuración. Gustavo Gili, Barcelona. pp. 41-77.

(38) Publicadas como ilustraciones sin apenas comentarios en Luigi Moretti. (1951-52). Struttura come forma. Spazio, 3(6): 21-30.

(39) Air Academy chapel shapes up. Architectural Forum, n.º 114 (May 1961), pp. 128-29.

(40) Seyn, W.K. y Hofman, J.W. (1964). De constructie van het visafslaggebouw te Scheveningen. Cement, (8): 461-67.

(41) Angerer, Fred. (1972). Construcción laminar. Elementos y estructuración. Gustavo Gili, Barcelona. pp. 78-79.

(42) Fiumicino. (1961). Aeropuerto internacional de Roma. Informes de la construcción, n.º 36, sin paginar.

(43) Azpiazu, J. R., et al. (1962). Canódromo madrileño. Informes de la Construcción, n.º 138, sin paginar.

(44) Folded Plates Roof New Hangars. Architectural Record, n.º 3 (1958), pp. 223-27.

(45) Torroja, E. (1959). Lámina plegada. Universidad Laboral de Tarragona. Informes de la Construcción, n.º 107, sin paginar.

(46) IBM online digital archives, http://www-03.ibm.com/ibm/history/exhibits/vintage/vintage_4506VV2259.html, (visitada 10 enero 2010).

(47) Ishikawa Lab, Album of Spatial Structures (ALOSS) http://www.anc-d.fukui-u.ac.jp/~ishikawa/Aloss/data/folded_plate/Catalog/catalog1.htm (visitada 10 enero 2010).

(48) Angerer, Fred. (1972). Construcción laminar. Elementos y estructuración. Gustavo Gili, Barcelona. pp. 74-75.

(49) Wieschemann, Paul Gerhard y Gatz, Konrad. (1969). Edificios de hormigón, Gustavo Gili, Barcelona, p. 159.

(50) Wieschemann, Paul Gerhard y Gatz, Konrad. (1969). Edificios de hormigón, Gustavo Gili, Barcelona, p. 140.

(51) Bologna, G. ed. (1974). Die St. Albert-Kirche in Freiburg (BR Deutschland). Lichtbeton im Hoch-und Ingenieurbau, Cembureau, Paris, pp. 180-185.

(52) Ingerslev, E. (1970). Sports Stadium near Copenhagen. IASS Symposium, vol. 2 (Vienna).

(53) ALOSS, http://www.anc-d.fukui-u.ac.jp/~ishikawa/years/unknown/Structural%20Systems- Countries/etc/Europe/19xx-folded-HUNGARY/Hall..,TechUnivofbudapest.htm (visitada 12 enero 2010)

(54) Hernández de Lasala, S. (1995). El Teleférico de el Avila. Alejandro Pietri Arquitecto, pp. 88-109, Fundación Andrés Sosa Pietri, Caracas.

(55) Moholy-Nagy, S. (1999). Carlos Raúl Villanueva y la arquitectura de Venezuela. Instituto del Patrimonio Cultural, Caracas.

(56) Hernández de Lasala, S. (2006). En busca de lo sublime: Villanueva y la Ciudad Universitaria de Caracas. Consejo de Preservación y Desarrollo, Universidad Central de Venezuela, Caracas.

(57) Kanstein, F. (1956). Nieuw duits onderzoek-instituut voor de cementindustrie. Cement, (19-20): 473.

(58) Künzel, W. (1956). Het uiterlijk aanzien van beton. Cement, (23-24): 572-573.

(59) Whitney, Charles S. (1958). Cantilevered folded plate roofs ACI headquarters. Journal of the American Concrete Institute, 30(4): 427-430.

(60) Strang, J. (1958). Construction for ACI. Journal of the American Concrete Institute 30(4): 431-38.

(61) Casinello, F. (1961). Estructuras plegadas. Informes de la Construcción, n.º 135, sin paginar.

(62) Wieschemann, Paul Gerhard y Gatz, Konrad. (1969). Edificios de hormigón, Gustavo Gili, Barcelona, p. 157.

(63) Kantoorgebouw Van Leer’s Vatenfabrieken N.V. te Amstelveen. Bouwkundig Weekblad, no. 48 (1959) p. 574

(64) Van der Werf, A. (1958-59). Kantoorgebouw te Amstelveen. Technisch Bouwblad, n.º 21, pp. 333-36.

(65) Pehnt, Wolfgang. (1999) Gottfried Böhm. pp. 30, 58-59, 64-66, 75-79, Birkhauser: Basel, Berlin, Boston.

(66) Schalen und Faltwerke, Bauwelt. (1967). (58)36: 912.

(67) Henn, W. (1965). Buildings for Industry. Hyden, Iliffe books, New York, London, pp. 93-95.

(68) Kenchiku bunka, n.º145 (1958) pp. 49-51.

(69) A Folded Plate Shell for Concerts and Kabuki. Architectural Record. (1962). vol. 132, pp. 157-162.

(70) Centro musical Gunma. Takasaki, Japón. Informes de la Construcción, n.º 144, (1962) pp. 146-63.

(71) Beer, H. (1970). Conclusions. IASS Symposium, vol. 2, Vienna.

(72) Miura, K. (1970). Proposition of Pseudo-Cylindrical Concave Polyhedral Shell. IASS Symposium, vol. 1, Vienna.

(73) Resch, R. y Christiansen, H.N. (1970). Kinematic Folded Plate System. IASS Symposium, vol. 1, Vienna.

(74) Kolozsvary, A. (1970). The Universal Folded Plate (UFP) Industrial Structural System. IASS Symposium, vol. 2, Vienna: .

(75) Huybers, P. (1970). Large Span Folded Structures in Plastics. IASS Symposium, vol. 2, Vienna.

(76) Zetlin, L. y Thornton, Ch.H. (1970). World’s Larges Light Gage Steel Folded Hyperbolic Paraboloidal Shell Roof Structure. IASS Symposium, vol. 2, Vienna.

(77) Hanna, M.M. y Farad, A. (1970). Optimum Dimensions and Choice of Form to R.C. Cast-In-Situ Prismatic Roofs. IASS Symposium, vol. 2, Vienna.

(78) Hahn, L. (1970). A Roof Structure of Folded Plates (Conference Hall of the Unesco Building in Paris. IASS Symposium, vol. 2, Vienna. PMid:4939147

(79) Amsler, Th. A. (1970). Alleghany Airlines Hangar, Logan International Airport, Boston, Mass., U.S.A. IASS Symposium, vol. 2, Vienna.

(80) Wilby, C. B. (1998). Concrete folded plate roofs. Arnold, London, p. 12.

(81)www.ketchum.org/-milo/what.html (visita 10 enero de 2010).

(82) Our Lady of the Assumption Parish Church. Canadian architect, 53(12): 44-46. 2008.

Descargas

Publicado

2013-03-30

Cómo citar

García, R. (2013). Dos décadas de estructuras plegadas de hormigón. Inicio y ocaso de un movimiento. Informes De La Construcción, 65(529), 27–39. https://doi.org/10.3989/ic.11.083

Número

Sección

Artículos