Reflectancia solar de las envolventes opacas de la ciudad y su efecto sobre las temperaturas urbanas

Autores/as

  • N. Alchapar Instituto Ciencias Humanas Sociales y Ambientales, CCT-Mendoza, CONICET
  • E. Correa Instituto Ciencias Humanas Sociales y Ambientales, CCT-Mendoza, CONICET

DOI:

https://doi.org/10.3989/ic.14.131

Palabras clave:

Microclima, envolvente urbana, comportamiento térmico, características de los materiales

Resumen


La selección adecuada de las envolventes contribuye a disminuir las temperaturas de la ciudad. En este trabajo se caracterizó el comportamiento térmico de 150 materiales disponibles a nivel local mediante el Índice de Reflectancia Solar (SRI) y se determinó su impacto sobre la temperatura urbana. Para ello se simularon 6 escenarios en la ciudad de Mendoza- Argentina, mediante el uso del software ENVI-met. Los resultados revelaron que aunque el color es una variable determinante del desempeño térmico superficial de un material su comportamiento puede ser mejorado o empobrecido por el efecto de otras características como: terminación, composición y envejecimiento. A igualdad de color, estas características pueden modificar la temperatura superficial de un material entre 20 y 29 °C. A escala urbana, los resultados muestran que la selección adecuada de materiales de la envolvente urbana podría disminuir hasta 3 °C la temperatura del aire y 12 °C la temperatura de las superficies.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

(1) Millennium Ecosystem Assessment. (2005). Ecosystems and Human Well-being e Current State and Trends. Washington, DC: Island Press.

(2) Madlener, R., Sunak, Y. (2011). Impacts of urbanization on urban structures and energy demand: What can we learn for urban energy planning and urbanization management. Sustainable Cities and Society, 1(1): 45-53. http://dx.doi.org/10.1016/j.scs.2010.08.006

(3) International Energy Agency (IEA). (2013). Key World Energy Statistic. http://www.iea.org/publications/freepublications/publication/KeyWorld2013.pdf.

(4) Perez-Lombard, L., Ortiz, J., Pout, C. (2008). A review on buildings energy consumption information. Energy Building, 40(3): 394-398. http://dx.doi.org/10.1016/j.enbuild.2007.03.007

(5) Santamouris, M. (2007). Heat island research in Europe - The state of the art. Journal Advances Building Energy Research, 1(1): 123-150. http://dx.doi.org/10.1080/17512549.2007.9687272

(6) Mirzaei, P., Haghighat, F. (2010). Approaches to study urban heat island – Abilities and limitations. Building and Environment, 45(10): 2192-2201. http://dx.doi.org/10.1016/j.buildenv.2010.04.001

(7) Founda, D. (2011). Evolution of the air temperature in Athens and evidence of climatic change: A review. Advances in Building Energy Research, 5(1): 7-41. http://dx.doi.org/10.1080/17512549.2011.582338

(8) Mihalakakou, P., Santamouris, M., Papanikolaou, N., Cartalis, C., Tsangrassoulis, A. (2004). Simulation of the urban heat island phenomenon in Mediterranean Climates. Journal of Pure and Applied Geophysics, 161(2): 429-451. http://dx.doi.org/10.1007/s00024-003-2447-4

(9) Livada, I., Santamouris, M., Niachou, K., Papanikolaou, N., Mihalakakou, G. (2002). Determination of places in the Great Athens Area where the Heat Island Effect is Observed. Theoretical and Applied Climatology, 71(3-4): 219-230. http://dx.doi.org/10.1007/s007040200006

(10) Mohsin, T., Gough, W. (2012). Characterization and estimation of urban heat island at Toronto: Impact of the choice of rural sites. Theoretical and Applied Climatology, 108(1-2): 105-117. http://dx.doi.org/10.1007/s00704-011-0516-7

(11) Papanastasiou, D., Kittas, C. (2012). Maximum urban heat island intensity in a medium-sized coastal mediterranean city. Theoretical and Applied Climatology, 107(3-4): 407-416. http://dx.doi.org/10.1007/s00704-011-0491-z

(12) ASTM. (2011). ASTM E1980-11. Standard practice for calculating solar reflectance index of horizontal and low-sloped opaque surfaces. ASTM International.

(13) Bruse, M. (1999). Die Auswirkungen kleinskaliger Umweltgestaltung auf das Mikroklima. Entwicklung des prognostischen numerischen Modells ENVI-met zur Simulation der Wind-, Temperatur, und Feuchtverteilung in städtischen Strukturen (PhD. Thesis). Germany: Univ. Bochum.

(14) Kru.ger, E., Minella, F., Rasia, F. (2011). Impact of urban geometry on outdoor thermal comfort and air quality from field measurements in Curitiba, Brazil. Building and Environment, 46(3): 621-634.

(15) Soo-Gon, H., Sun-Hye, M., Jung-Ho, H. (2007). Changes of the micro-climate and building cooling load due to the green effect of a restored stream in Seoul, Korea. En Proceedings Building Simulation (pp. 1131-1138).

(16) Samaali, M., Courault, D., Bruse, M., Olioso, A., Occelli, R. (2007). Analysis of a 3D boundary layer model at local scale: Validation on soybean surface radiative measurements. Atmospheric Research, 85(2): 183-198. http://dx.doi.org/10.1016/j.atmosres.2006.12.005

(17) Bruse, M. (2009). Stadtlandschaft im Klimawandel-Zu den Grundlagen des städtischen Mikroklimas. En Collinet, H.D., Pesch, F. (Eds.) Stadt und Landschaft. Essen: Klartext Verlag. PMCid:PMC2695543

(18) Chowa, W., Brazel, A. (2012). Assessing xeriscaping as a sustainable heat island mitigation approach for a desert city. Building and Environment, 47: 170-181. http://dx.doi.org/10.1016/j.buildenv.2011.07.027

(19) Perini, K., Magliocco, A. (2014). Effects of vegetation, urban density, building height, and atmospheric conditions on local temperatures and thermal comfort. Urban Forestry and Urban Greening, 13(3): 495-506. http://dx.doi.org/10.1016/j.ufug.2014.03.003

(20) Taleghani, M., Kleerekoper, M., Tenpierik, M., Dobbelsteen, A. (2014). Outdoor thermal comfort within five different urban forms in the Netherlands. Building and Environment, 83: 65-78. http://dx.doi.org/10.1016/j.buildenv.2014.03.014

(21) Ali-Toudert, F. (2005). Dependence of outdoor thermal comfort on street design in hot and dry climate. Berichte des Meteorologischen Institutes der Universität Freiburg No. 15. http://www.freidok.uni-freiburg.de/volltexte/2078.

(22) ASTM. (2006). ASTM E1933-99a: American Society for Testing and Materials. Standard Test Methodos for measuring and compensating for emissivity using infrared imaging radiometers. ASTM International.

(23) Akbari, H., Levinson, R., Stern, S. Procedure for measuring the solar reflectance of flat or curved roofing assemblies. Solar Energy, 82(7): 648-655. http://dx.doi.org/10.1016/j.solener.2008.01.001

(24) Correa, E., Ruiz, M. A., Canton, A., Lesino, G. (2012). Thermal comfort in forested urban canyons of low building density. An assessment for the city of Mendoza, Argentina. Build and Environment, 58: 219-230 http://dx.doi.org/10.1016/j.buildenv.2012.06.007

Publicado

2015-12-30

Cómo citar

Alchapar, N., & Correa, E. (2015). Reflectancia solar de las envolventes opacas de la ciudad y su efecto sobre las temperaturas urbanas. Informes De La Construcción, 67(540), e112. https://doi.org/10.3989/ic.14.131

Número

Sección

Artículos