Estructuras de fábrica: enfoques «antiguos» y «modernos» para fenómenos muy locales

Autores/as

  • F. Magdalena-Layos Escuela Técnica Superior de Edificación – Universidad Politécnica de Madrid
  • J. García-Muñoz Escuela Técnica Superior de Edificación – Universidad Politécnica de Madrid
  • D. Mencias-Carrizosa Escuela Técnica Superior de Arquitectura – Universidad Politécnica de Madrid

DOI:

https://doi.org/10.3989/ic.16.032

Palabras clave:

Estructuras de fábrica, fotoelasticidad, elementos finitos heterogéneos, bloques rígidos, contacto unilateral

Resumen


Para estudiar ciertos fenómenos de comportamiento local en las estructuras históricas de fábrica se propone la caracterización del material como un medio discontinuo. Se implementan tres métodos: uno experimental, fotoelástico, y dos numéricos, elementos finitos heterogéneos y bloques rígidos en contacto unilateral. De la comparación cualitativa de los resultados se deduce que las irregularidades aleatorias en el contacto entre piezas desempeñan un importante papel en la explicación del comportamiento local de la fábrica. La comparación cuantitativa con los resultados de ensayos de carga realizados previamente sobre muros aparejados en seco apoyan esta hipótesis. Los resultados obtenidos son muy esperanzadores y hacen pensar que es necesario profundizar en el desarrollo de enfoques de este tipo que, aún siendo relativamente comunes en el campo de los medios granulares, han sido muy escasos en el campo de las estructuras históricas de fábrica.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

(1) Roca, P., Cervera, M., Gariup, G. (2010). Structural analysis of masonry historical constructions. Classical and advanced approaches. Archives of Computational Methods in Engineering, 17(3): 299-325. http://dx.doi.org/10.1007/s11831-010-9046-1

(2) Tralli, A., Alessandri, C., Milani, G. (2014). Computational methods for masonry vaults: a review of recent results. Open J. Civ. Eng., 8(1): 272-287. http://dx.doi.org/10.2174/1874149501408010272

(3) Magdalena, F. (2013). El problema del rozamiento en el análisis de estructuras de fábrica mediante modelos de sólidos rígidos. Tesis de doctorado. Universidad Politécnica de Madrid.

(4) Magdalena, F., Aznar, A., Hernando, J. I., Magdalena, E. (2015). Sliding collapse in masonry structures: experimental tests. En CMMoST 2015 3rd International Conference on Mechanical Models in Structural Engineering, pp. 640-649. Sevilla, Espa-a. PMCid:PMC4661223

(5) Bigoni, D., Noselli, G. (2010). Localized stress percolation through dry masonry walls. Part I–Experiments and Part II–Modelling. European Journal of Mechanics-A/Solids, 29(3): 291-307. http://dx.doi.org/10.1016/j.euromechsol.2009.10.009

(6) Frocht, M. M. (1965). Photoelasticity. London: J. Wiley and Sons.

(7) Dally, J. W., Riley, W. F. (1991). Experimental Stress Analysis, 3rd edition. McGraw-Hill Inc.

(8) Drescher, A., de Josseling de Jong, G. (1972). Photoelastic verification of a mechanical model for the flow of a granular material. J. Mech. Phys. Solids 20: 337-351. http://dx.doi.org/10.1016/0022-5096(72)90029-4

(9) McNicholas, J. B. (1970). Photoelastic Stress Analysis of Brick Masonry Systems. SIBMAC Proceedings. En 2nd International Brick and Block Masonry Conference, pp. 88-94. Stoke-on-Trent, England.

(10) Heinrich, B. (1977). Am Anfang war der Balken. Technik lernen mit übergreifenden Bezügen. Kultur & Technik, 1: 38-45. Berlin: Deutsches Museum.

(11) Rajchenbach, J. (2001). Stress transmission through a cohesionless material. Mater. Phys. Mech., 3: 1-4.

(12) Baig, I., Ramesh, K., Hariprasad, M. P. (2015). Analysis of stress distribution in dry masonry walls using three fringe photoelasticity. En International Conference on Experimental Mechanics 2014, pp. 93022P-93022P. International Society for Optics and Photonics.

(13) Heywood, R. B. (1969). Photoelasticity for Designers, 1st edition. Pergamon Press. PMCid:PMC493386

(14) SAP2000 Advanced 14.0.0. Programa de análisis estructural. Computers and Structures, Inc. (2009).

(15) Narayanan, S. P., Sirajuddin, M. (2013). Properties of Brick Masonry for FE modeling. American Journal of Engineering Research (AJER). e-ISSN: 2320-0847.

(16) Baraldi, D., Cecchi, A., Tralli, A. (2015). Continuous and discrete models for masonry like material: A critical comparative study. European Journal of Mechanics - A/Solids, 50: 39-58. http://dx.doi.org/10.1016/j.euromechsol.2014.10.007

(17) Cundall, P. A. (1971). A computer model for simulating progressive large scale movements in blocky rock systems. En Proc. Symp. Rock Fracture (ISRM), vol. 1, paper II-8, Nancy.

(18) Livesley R. K. (1978). Limit analysis of structures formed from rigid blocks. International Journal for Numerical Methods in Engineering, 12(12): 1853-1871. http://dx.doi.org/10.1002/nme.1620121207

(19) Gilbert, M., Melbourne, C. (1994). Rigid-block analysis of masonry structures. Structural engineer, 72(21): 356-361.

(20) Fishwick, R. J. (1996). Limit analysis of rigid block structures. Tesis doctoral. Portsmouth: Department of Civil Engineering, University of Portsmouth.

(21) Ferris, M. C., Tin-Loi, F. (2001). Limit analysis of frictional block assemblies as a mathematical program with complementarity constraints. International Journal of Mechanical Sciences, 43(1): 209-224. http://dx.doi.org/10.1016/S0020-7403(99)00111-3

(22) Cottle, R. W., Pang, J. S., Stone, R. E. (2009). The linear complementarity problem. SIAM Classics in Applied Mathematics. http://dx.doi.org/10.1137/1.9780898719000 PMCid:PMC2786031

(23) Rubinstein, R. Y., Kroese, D. P. (2007). Simulation and the Monte Carlo method. Wiley.com. http://dx.doi.org/10.1002/9780470230381

(24) Magdalena-Layos, F., Hernando-García, J. (2014). Análisis límite de estructuras de fábrica como problema de contacto unilateral: un enfoque probabilista. Informes de la Construcción, 66(Extra-1): m015.

(25) Magdalena, F., Hernando, J. I., Magdalena, E. (2015). Sliding collapse in masonry structures: a numerical model. En CMMoST 2015 3rd International Conference on Mechanical Models in Structural Engineering, pp. 629-639. Sevilla, Espa-a. PMCid:PMC4661223

(26) Wand, M. P., Jones, M. C. (1995). Kernel Smoothing. London: Chapman & Hall/CRC. http://dx.doi.org/10.1007/978-1-4899-4493-1

(27) Neyman, J. (1937). Outline of a Theory of Statistical Estimation Based on the Classical Theory of Probability. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 236(767): 333-380. http://dx.doi.org/10.1098/rsta.1937.0005

(28) Nikiforov A. M. (1994). Algorithm AS 288: Exact two-sample Smirnov test for arbitrary distributions. Appl. Stat., 43(1): 265-270. http://dx.doi.org/10.2307/2986126

Publicado

2016-06-30

Cómo citar

Magdalena-Layos, F., García-Muñoz, J., & Mencias-Carrizosa, D. (2016). Estructuras de fábrica: enfoques «antiguos» y «modernos» para fenómenos muy locales. Informes De La Construcción, 68(542), e150. https://doi.org/10.3989/ic.16.032

Número

Sección

Artículos