Mallas tensegríticas de doble capa y manipulaciones de Rot-Umbela

Autores/as

  • V. Gómez-Jáuregui Universidad de Cantabria

DOI:

https://doi.org/10.3989/ic.11.053

Palabras clave:

Tensegridad, estructuras, mallas, doble capa, Rot-Umbela

Resumen


Las mallas tensegríticas de doble capa (MTDC) son estructuras de Tensegridad que contiene dos mallas traccionadas paralelas, unidas por otra capa intermedia compuesta por elementos comprimidos y traccionados verticales y/o diagonales. Este trabajo presenta inicialmente un breve repaso sobre las propuestas de MTDC que se han realizado hasta el momento, exponiendo luego una nueva metodología, eminentemente geométrica, para la generación de este tipo de estructuras tensegríticas. Tras aplicar la propuesta de Otero para generar mallas de doble capa (MDC) convencionales, se procede a realizar Manipulaciones de Rot-Umbela en las capas inferior y/o superior para convertir dicha estructura en una MTDC. Las Manipulaciones de Rot-Umbela consisten en la apertura de cada vértice en un cierto polígono, al cual se le aplica una rotación o giro particular. Se consigue así un potente sistema para “tensegritizar” MDC convencionales y abrir una línea de investigación muy interesante en el campo de la Tensegridad.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

(1) Gómez-Jáuregui, V.: Tensegrity structures and their application to architecture, Santander: Universidad de Cantabria. Servicio de Publicaciones, 2010.

(2) Cuevas Riaño, M.: “Estructuras lógicas en las artes plásticas”, Tesis Doctoral, Universidad Complutense de Madrid, 2007.

(3) Gómez-Jáuregui, V.: “Controversial Origins of Tensegrity”, en Symposium of the International Association for Shell and Spatial Structures (50th. 2009. Valencia). Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures: Proceedings/ Alberto Domingo and Carlos Lázaro, eds., 2009.

(4) Fuller, B. R.: “Tensile-integrity structures”, Patente US3063521, concedida 13-Oct-1962.

(5) Snelson, K. D.: “Continuous tension, discontinuous compression structures”, Patente US3169611, concedida 16-Feb-1965.

(6) Emmerich, D. G.: “Construction de réseaux autotendants”, Patente FP1377290, concedida 28-Sep-1964.

(7) Emmerich, D. G.: “Structures linéaires autotendants”, Patente FP1377291, concedida 28-Sep-1964.

(8) Burkhardt, R.: “Snelson’s Planar Pieces”. [Online]. Disponible en: http://www.trip.net/~bobwb/ts/synergetics/photos/planar.html. [Acceso: 26-Jan-2011].

(9) Snelson, K.: Correspondencia personal con el autor, 16-Oct-2010.

(10) Pugh, A.: “An introduction to tensegrity“, Berkeley: University of California Press, 1976.

(11) Vilnay, O.: “Structures made of infinite regular tensegric nets”, Bulletin of the International Association of Shell and Spatial Structures, vol. 18, no. 63, pp. 51-57, 1977.

(12) Hanaor, A.: “Preliminary investigation of double-layer tensegrities”, en Proceedings of International Conference on the Design and Construction of Non-conventional Structures, vol. 2, 1987.

(13) Hanaor, A.; Liao, M.-K.: “Double-layer tensegrity grids: static load response. I: analytical study”, Journal of structural engineering, vol. 117, no. 6, pp. 1660-1674, 1991. http://dx.doi.org/10.1061/(ASCE)0733-9445(1991)117:6(1660)

(14) Hanaor, A.: “Double-layer tensegrity grids: static load response. II: experimental study”, Journal of structural engineering, vol. 117, no. 6, pp. 1675-1684, 1991. http://dx.doi.org/10.1061/(ASCE)0733-9445(1991)117:6(1675)

(15) Hanaor, A.: “Aspects of design of double-layer tensegrity domes”, International Journal of Space Structures, vol. 7, no. 2, pp. 101-113, 1992.

(16) Hanaor, A.: “Double-layer tensegrity grids as deployable structures”, International Journal of Space Structures, vol. 8, no. 1-2, pp. 135-143, 1993.

(17) Hanaor, A.: “Geometrically rigid double-layer tensegrity grids”, International Journal of Space Structures, vol. 9, no. 4, pp. 227-238, 1994.

(18) Hanaor, A.: “Tensegrity: Theory and application”, en Beyond the Cube: The Architecture of Space Frames and Polyhedra, J. Francois Gabriel, John Wiley and Sons, Ic, pp. 385-408, 1997.

(19) Motro, R.: “Tensegrity systems for double layer space structures”, en Proceedings of International Conference on the Design and Construction of Non-conventional Structures, vol. 2, 1987.

(20) Motro, R.: “Tensegrity systems: the state of the art”, International Journal of Space Structures, vol. 7, no. 2, pp. 75-83, 1992.

(21) Motro, R.: “Tensegrity systems : latest developments and perspectives”, presentado en 10 years of progress in Shell and Spatial Structures. IASS Symposium 1989, Madrid, 1989.

(22) Motro, R.: Tensegrity: Structural systems for the future, London, Sterling, V. A: Kogan Page Science, 2003.

(23) Motro, R.: “Structural morphology of tensegrity systems”, Asian Journal of Civil Engineering, vol. 10, no. 1, pp. 1-19, 2009.

(24) Maurin, B.; Motro, R.; Raducanu, V.; Pauli, N.: “Soft ‘tensegrity like’ panel: Conceptual design and Form - Finding”, Journal of the International Association for Shell and Spatial Structures, vol. 49, no. 158, pp. 77-87, 2008.

(25) Nestorovic, M.: “Metallic Integrally Tensioned (Tensegrity) Cupola”, en Proceedings of International Conference on the Design and Construction of Non-conventional Structures, vol. 2, 1987.

(26) Nestorovic, M.: “Analysis of the properties of integrally tensioned tensegrity domes”, presentado en Procedings of the 4th International Conference on Space Structures, London, 1993.

(27) Emmerich, D. G.: Structures tendues et autotendantes, École d’architecture de Paris la Villette, 1988.

(28) Emmerich, D. G.: “Self-tensioning spherical structures: single and double layer spheroids”, International Journal of Space Structures, vol. 5, no. 3, pp. 335-374, 1990.

(29) Emmerich, D. G.: “Emmerich on self-tensioning structures”, International Journal of Space Structures, vol. 11, no. 1-2, pp. 29-36, 1996.

(30) Wang, B.-B.; Liu, X.-L.: “Integral-tension research in double-layer tensegrity grids”, International Journal of Space Structures, vol. 11, no. 4, pp. 349-355, 1996.

(31) Wang, B.-B.: “Simplexes in tensegrity systems”, Journal of the International Association for Shell and Spatial Structures, vol. 40, no. 129, pp. 57-64, 1999.

(32) Wang, B.-B.: “Cable-Strut Systems: Part II - Cable-Strut”, Journal of Constructional Steel Research, vol. 45, no. 3, pp. 291-299, 1998. http://dx.doi.org/10.1016/S0143-974X(97)00076-X

(33) Wang, B.-B.: “Cable-Strut Systems: Part I - Tensegrity”, Journal of Constructional Steel Research, vol. 45, no. 3, pp. 281-289, 1998. http://dx.doi.org/10.1016/S0143-974X(97)00075-8

(34) Wang, B.-B.; Li, Y. Y.: “RP system-properties, design and applications”, en Proceedings Of The International Symposium of Lightweight Structures In Civil Engineering, 2002.

(35) Wang, B.; Li, Y.: “Novel cable-strut grids made of prisms: Part I. Basic theory and design”, Journal of the International Association for Shell and Spatial Structures, vol. 44, no. 142, pp. 93-108, 2003.

(36) Wang, B.; Li, Y.: “Novel cable-strut grids made of prisms: Part II. Deployable and architectural studies”, Journal of the International Association for Shell and Spatial Structures, vol. 44, no. 142, pp. 109-125, 2003.

(37) Wang, B.: Free-standing tension structures: from tensegrity systems to cable-strut systems, London; New York: Spon Press, 2004.

(38) Wang, B.B.; Li, Y.Y.: “Cable-strut systems of non-contiguous strut configurations - Morphological study”, Journal of the International Association for Shell and Spatial Structures, vol. 46, no. 147, pp. 23-39, 2005.

(39) Hilyard, M. J.; Lalvani, H.: “Emmerich-type structures constructed fromtensegrity modules”, presentado en IASS Structural Morphology Colloquium 2000, Bridge Between Civil Engineering & Architecture, Delft, p. 196–205, 2000.

(40) Kono, Y.; Kunieda, H.: “Tensegrity grids transformed from double-layer space grids”, presentado en Proceedings Conceptual Design of Structures, IASS, Stuttgart, pp. 293-300, 1996.

(41) Kono, Y.; Kunieda, H.: “A class of double-layer tensegrity grid domes”, Singapore, pp. 455-463, 1997.

(42) Kono, Y.; Kunieda, H.: “Experimental Study On Static Load Responses Of Double Layer Tensegrity Grids”, J. Struct. Constr. Eng., AIJ, no. 502, pp. 93-97, 1997.

(43) Kono, Y.; Kunieda, H.; Shimada, T.: “Form-Finding Of Double-Layer Tensegrity Grids With Multiple States of Self-Stress”, J. Struct. Constr. Eng., AIJ, no. 501, pp. 73-76, 1997.

(44) Kono, Y.; Choong, K.K.; Shimada, T.; Kunieda, H.: “An experimental investigation of a type of double-layer tensegrity grids”, Journal of the International Association for Shell and Spatial Structures, vol. 40, no. 130, pp. 103-111, 1999.

(45) Kono, Y.; Kunieda, H.: “Frame Structure And Method For Forming The Same”, Patente WO9744543, concedida 27-Feb-2001.

(46) Quirant, J.; Motro, R.; Kazi-Aoual, M.: “Designing tensegrity systems: the case of a double layer grid”, Engineering Structures, vol. 25, no. 9, pp. 1121-1130. http://dx.doi.org/10.1016/S0141-0296(03)00021-X

(47) Quirant, J.: “Systèmes de tenségrité et autocontrainte: Qualification, sensibilité et incidence sur le comportement”, Tesis Doctoral, Université de Montpellier II, 2000.

(48) Quirant, J.; Kazi-Aoual, M. N.; Laporte, R.: “Tensegrity systems: The application of linear programmation in search of compatible selfstress states”, Journal of the International Association for Shell and Spatial Structures, vol. 44, no. 141, pp. 33-50, 2003.

(49) Smaili, A.; Motro, R.: “Foldable / unfoldable curved tensegrity systems by finite mechanism activation”, Journal of the International Association for Shell and Spatial Structures, vol. 48, no. 155, pp. 153-160, 2007.

(50) Smaili, A.; Motro, R.: “A self-stress maintening folding tensegrity system by finite mechanism activation”, Journal of the International Association for Shell and Spatial Structures, vol. 46, no. 148, pp. 85-93, 2005.

(51) Smaili, A.; Motro, R.: “Folding/unfolding of tensegrity systems by removal of self-stress”, en International symposium on shell and spatial structures, pp. 595–602, 2005.

(52) Smaili, A.: “Systemes legers pliables/depliables: cas des systemes de tensegrite”, Tesis Doctoral, Université de Montpellier II, 2004.

(53) Sánchez, R.; Kazi Aoual, M. N.; Motro, R.: “Pre-Sizing Of Tensegrity Systems”, en Proceedings Of The International Symposium, 2002.

(54) Sánchez, R.; Maurin, B.; Kazi-Aoual, M. N.; Motro, R.: “Modélisation des systèmes de tenségrité: Grilles à double nappe”, Montpellier: Laboratoire de Mécanique et Génie Civil. Université Montpellier II. Disponible en http://www.lirmm.fr/doctiss04/art/ M, 2003.

(55) Bouderbala, M.; Motro, R.: “Folding tensegrity systems”, Solid Mechanics and its applications, vol. 80, pp. 27-36, 2000.

(56) Vassart, N.: “Recherche de forme et stabilité des systèmes réticulés autocontraints - Application aux systèmes de tenségrité”, Tesis Doctoral, Université de Montpellier II, 1997.

(57) Averseng, J.; Dubé, J.-F.; Crosnier, B.; Motro, R.: “Active control of a tensegrity plane grid,” en Proceedings of the 44th IEEE Conference on Decision and Control, and the European Control Conference, CDC-ECC ’05, vol. 2005, pp. 6830-6834, 2005.

(58) Averseng, J.: “Mise en oeuvre et contrôle des systèmes de tenségrité”, Tesis Doctoral, Université de Montpellier II, 2004.

(59) Averseng, J.; Crosnier, B.: “Static and dynamic robust control of tensegrity systems”, Journal of the International Association for Shell and Spatial Structures, vol. 45, no. 146, pp. 169-174, 2004.

(60) Averseng, J.; Crosnier, B.: “Prestressing tensegrity systems - Application to multiple selfstress state structures”, International Journal of Structural Stability and Dynamics, vol. 4, no. 4, pp. 543-557, 2004. http://dx.doi.org/10.1142/S0219455404001379

(61) Djouadi, S.; Motro, R.; Pons, J. C.; Crosnier, B.: “Active control of tensegrity systems”, Journal of Aerospace Engineering, vol. 11, no. 2, pp. 37-43, 1998. http://dx.doi.org/10.1061/(ASCE)0893-1321(1998)11:2(37)

(62) Kebiche, K.: “Etude en non-linéarités géométriques et homogénéisation des systèmes réticulés autocontraints : application aux systèmes de tenségrité”, Tesis Doctoral, Université de Montpellier II, 1998.

(63) Le Saux, C.: “Modélisation numérique du pliage et du déploiement des systèmes spatiaux avec prise en compte des contacts et des frottements”, Tesis Doctoral, Université de Montpellier II, 2002.

(64) Raducanu, V.: “Architecture Et Système Constructif - Case De Systémes De Tenségrité”, Tesis Doctoral, Université de Montpellier II, 2001.

(65) Pedretti, M.: “Smart tensegrity structures for the Swiss Expo 2001”, en Proceedings of SPIE - The International Society for Optical Engineering, vol. 3330, pp. 378-386, 1998.

(66) Adriaenssens, S. M. L.; Barnes, M. R.: “Tensegrity spline beam and grid shell structures”, Engineering Structures, vol. 23, no. 1, pp. 29-36. http://dx.doi.org/10.1016/S0141-0296(00)00019-5

(67) Panigrahi, R.; Gupta, A.; Bhalla, S.: “Design of tensegrity structures using artificial neural networks”, Structural Engineering and Mechanics, vol. 29, no. 2, pp. 223-235, 2008.

(68) Panigrahi, R.; Gupta, A.; Bhalla, S.: “Dismountable steel tensegrity grids as alternate roof structures”, Steel and Composite Structures, vol. 9, no. 3, pp. 239-253, 2009.

(69) Tran, H. C.; Lee, J.: “Advanced form-finding of tensegrity structures”, Computers & Structures, vol. 88, no. 3-4, pp. 237-246. http://dx.doi.org/10.1016/j.compstruc.2009.10.006

(70) Tran, H. C.; Lee, J.: “Initial self-stress design of tensegrity grid structures”, Computers and Structures, vol. 88, no. 9-10, pp. 558-566, 2010. http://dx.doi.org/10.1016/j.compstruc.2010.01.011

(71) Tran, H. C.; Lee, J.: “Self-stress design of tensegrity grid structures with exostresses”, International Journal of Solids and Structures, vol. 47, no. 20, pp. 2660-2671. http://dx.doi.org/10.1016/j.ijsolstr.2010.05.020

(72) Liapi, K.; Kim, J.: “Double-layer tensegrity grids for architectural applications”, Structures & Architecture, P. Cruz, Ed. CRC Press, pp. 429-430, 2010.

(73) Skelton, R.; De Oliveira, M. C.: Tensegrity systems, Dordrecht, London: Springer, 2009.

(74) Skelton,R.; Helton, W. J.; Adhikari, R.: “Mechanics of Tensegrity Beams”, UCSD, Structural Systems & Contr. Lab., Rep. N.º 1998-1, 1998.

(75) Otero, C.: Diseño geométrico de cúpulas no esféricas aproximadas por mallas triangulares con un número mínimo de longitudes de barra, Tesis Doctoral. Universidad de Cantabria, 1990.

(76) Otero, C.; Oti, J.; Villar, F.; Otero, F.: “Classical Geometry in flat and simple curved meshes”, Bulletin of the International Association of Shell and Spatial Structures, vol. 33, nº 108, pp. 3-31, 1992.

(77) Gómez-Jáuregui, V.; Otero, C.; Arias, R.; Manchado, C.: “Generation and nomenclature of tessellations and double-layer grids”, Journal of Structural Engineering-ASCE, July, 2012.

(78) Gómez-Jáuregui, V.; Arias, R.; Otero, C.; Manchado, C.: “Novel technique for obtaining double-layer tensegrity grids”, International Journal of Space Structures, vol. 27, número especial 2-3, pp. 155-166.

(79) Gancedo Lamadrid, E.: Estudio de propiedades métricas de las radiaciones centrales en poliedros convexos, Tesis Doctoral, Universidad de Cantabria, 1988.

(80) Gancedo Lamadrid, E.; Álvarez Gómez, J. M; Suárez González, J.; Vega Menéndez, J.: “A New Method to Obtain and Define Regular Polyhedra”, Geometriae Dedicata, vol. 106, nº 1 (2004), pp. 43-49. http://dx.doi.org/10.1023/B:GEOM.0000033841.77105.bb

(81) Tibert, A. G.; Pellegrino, S.: “Review of form-finding methods for tensegrity structures”. International Journal of Space Structures, vol. 18, nº4 (2003), pp. 209-223. http://dx.doi.org/10.1260/026635103322987940

(82) Zhang, J.Y.; Ohsaki, M.: “Adaptive force density method for form-finding problem of tensegrity structures”, International Journal of Solids and Structures, vol. 43, nº 18-19 (2006), pp. 5658-5673. http://dx.doi.org/10.1016/j.ijsolstr.2005.10.011

(83) Bel Hadj Ali, N.; Rhode-Barbarigos, L.; Smith, I. F. C.: “Analysis of clustered tensegrity structures using a modified dynamic relaxation algorithm”.

(84) Averseng, J.; Jérome Quirant; Jean-Francois Dubé: “Interactive Design And Dynamic Analysis Of Tensegrity Systems”, presentado en Structural Engineers World Congress 2011, Como (Italy), 2011.

(85) Tibert, G.: “Design And Form-Finding Analysis Of Tensegrity Power Lines”, presentado en Structural Enginners World Congress 2011, Como (Italy), 2011.

(86) Murcia, J.: “Tecnología de pasarelas con estructura de membrana”, Informes de la Construcción, vol. 59, nº 507 (2007), pp. 21-31.

Descargas

Publicado

2012-09-30

Cómo citar

Gómez-Jáuregui, V. (2012). Mallas tensegríticas de doble capa y manipulaciones de Rot-Umbela. Informes De La Construcción, 64(527), 331–344. https://doi.org/10.3989/ic.11.053

Número

Sección

Artículos