Comportamiento de los edificios de HA con tabiquería durante el sismo de Lorca de 2011: aplicación del método FAST

Autores/as

  • F. Gómez-Martínez ETS de Arquitectura - Universitat Politècnica de València
  • A. Pérez-García ETS de Arquitectura - Universitat Politècnica de València
  • F. De Luca Universidad Federico II
  • M. Verderame Universidad Federico II

DOI:

https://doi.org/10.3989/ic.12.110

Palabras clave:

Terremoto de Lorca, vulnerabilidad, tabiquería, FAST, nivel de daño, rotura frágil, NCSE-02

Resumen


Se ofrece una hipótesis de comportamiento de los edificios porticados de hormigón armado de Lorca ante el terremoto de 2011, mediante la aplicación del método FAST, procedimiento de estimación simplificada de la vulnerabilidad a gran escala de dichos edificios contando con la contribución estructural de la tabiquería de fábrica. Este terremoto tuvo una aceleración de pico (PGA) tres veces superior a la básica de proyecto; sin embargo, se caracterizó por la práctica ausencia de colapsos. Se estudian las propiedades del evento sísmico y las particularidades de la edificación para, a través de la aplicación de FAST, tratar de confirmar que dicha ausencia de colapsos pudiera deberse a la contribución estructural de la tabiquería, a pesar de no ser proyectada con ese fin ni regulada por las sucesivas regulaciones normativas. Los resultados obtenidos confirman en buena medida dicha hipótesis, siendo el nivel medio de daño previsto consistente con el escenario real.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

(1) Cabañas, L., Carreño, E., Izquierdo, A., Martínez, J.M., Capote, R., Martínez, J., Benito, B., Gaspar, J., Rivas, A., García, J., Pérez, R., Rodríguez, M.A., Murphy, P. (2011). Informe del sismo de Lorca del 11 de mayo de 2011.

(2) Goula, X., Figueras, S., Irizarry, J., Macau, A., Barbat, A., Lantada, N., Carreño, M.L., Valcárcel, J., Combescure, D., Belvaux, M., Monfort, D., Bremond, S., Verrhiest, G., Camares, C., Bairrao, R. (2011). Rapport de la mission AFPS du séisme de Lorca.

(3) Regalado, F., Lloret, V. (2011). Análisis y reflexiones sobre los terremotos del 11 de mayo del 2011 acontecidos en Lorca (sugerencias para el futuro).

(4) De Miguel, J.L. (2011). Lorca. Madrid: Departamento de Estructuras - ETSAM.

(5) De Luca, F., Verderame, G.M., Gómez Martínez, F., Pérez García, A. (2014). The structural role played by masonry infills on RC building performances after the 2011 Lorca, Spain, earthquake. Bulletin of Earthquake Engineering, 12(5): 1999-2026. http://dx.doi.org/10.1007/s10518-013-9500-1

(6) Ricci, P., De Luca, F., Verderame, G.M. (2011). 6th April 2009 L'Aquila earthquake, Italy: reinforced concrete building performance. Bulletin of Earthquake Engineering, 9(1):285-305. http://dx.doi.org/10.1007/s10518-010-9204-8

(7) Dol‰ek, M., Fajfar, P. (2001). Soft storey effects in uniformly infilled reinforced concrete frames. Journal of Earthquake Engineering 5(1):1-12.

(8) Ricci, P. (2010). Seismic vulnerability of existing RC buildings (Tesis). Nápoles, Italia: Università degli Studi di Napoli Federico II.

(9) Verderame, G.M., De Luca, F., Ricci, P., Manfredi, G. (2011). Preliminary analysis of a soft-storey mechanism after the 2009 L'Aquila earthquake. Earthquake Engineering and Structural Dynamics, 40(8):925-944. http://dx.doi.org/10.1002/eqe.1069

(10) Hermanns, L., Fraile, A., Alarcón, E., Álvarez, R. (2013). Performance of buildings with masonry infill walls during the 2011 Lorca Earthquake. Bulletin of Earthquake Engineering, 12(5): 1977-1997. http://dx.doi.org/10.1007/s10518-013-9499-3

(11) Benavent-Climent, A., Escobedo, A., Donaire-Ávila, J., Oliver-Saiz, E., Ramírez-Márquez, A.L. (2013). Assessment of expected damage on buildings subjected to Lorca earthquake through an energy-based seismic index method and nonlinear dynamic response analyses. Bulletin of Earthquake Engineering, 12(5): 2049-2073. http://dx.doi.org/10.1007/s10518-013-9513-9

(12) Manfredi, G., Prota, A., Verderame, G.M., De Luca, F., Ricci, P. (2013). 2012 Emilia earthquake, Italy: reinforced concrete buildings response. Bulletin of Earthquake Engineering, 12(5): 2275-2298. http://dx.doi.org/10.1007/s10518-013-9512-x

(13) Verderame, G.M., De Luca, F., De Risi, M.T., Del Gaudio, C., Ricci, P. (2012). A three level vulnerability approach for damage assessment of infilled RC buildings: The Emilia 2012 case (V 1.0). http://www.reluis.it/.

(14) Grunthal, G. (Ed.). (1998). Cahiers du Centre Europeen de Geodynamique et de Seismologie,Vol. 7, 99 pp. Luxembourg: European Macroseismic Scale 1998.

(15) Gómez-Martínez, F., Pérez-García, A., De Luca, F., Verderame, G.M., Manfredi, G. (2012). Preliminary study of the structural role played by masonry infills on RC building performances after the 2011 Lorca, Spain, earthquake. En Actas del 15th World Conference on Earthquake Engineering. Lisboa.

(16) Vidic, T., Fajfar, P., Fischinger, M. (1994). Consistent inelastic design spectra: strength and displacement. Earthquake engineering and structural dynamics, 23(5): 502-521. http://dx.doi.org/10.1002/eqe.4290230504

(17) Dol‰ek, M., Fajfar, P. (2004). IN2 - A simple alternative for IDA. Earthquake Engineering and Structural Dynamics, 33(15): 1395-1416.

(18) Dolce, M., Cardone, D., Ponzo, F.C., Valente, C. (2005). Shaking table tests on reinforced concrete frames without and with passive control systems. Earthquake Engineering and Structural Dynamics, 34(14): 1687-1717. http://dx.doi.org/10.1002/eqe.501

(19) Kircher, C.A., Nassar, A.A., Kutsu, O., Holmes, W.T. (1997). Development of building damage functions for earthquake loss estimation. Earthquake Spectra, 13(4): 663-681. http://dx.doi.org/10.1193/1.1585974

(20) Borzi, B., Pinho, R., Crowley, H. (2008). Simplified pushover-based vulnerability analysis for large scale assessment of RC buildings. Engineering Structures, 30(3): 804-820. http://dx.doi.org/10.1016/j.engstruct.2007.05.021

(21) Dol‰ek, M., Fajfar, P. (2004). Inelastic spectra for infilled reinforced concrete frames. En Actas del 13th World Conference on Earthquake Engineering. Vancouver, B.C., Canada. http://dx.doi.org/10.1002/eqe.410

(22) Ricci, P., Verderame G. M., Manfredi G. (2011). Analytical investigation of elastic period of infilled RC MRF buildings. Engineering Structures, 33(2): 308-319. http://dx.doi.org/10.1016/j.engstruct.2010.10.009

(23) Gómez-Martínez, F., Pérez-García, A., De Luca, F., Verderame, G.M. (2014). Gerenalized FAST approach for seismic assessment of infilled RC MRF buildings: application to the 2011 Lorca earthquake. En WIT Transactions on the Built Environment, corresponding to the proceedings of the 13th International Conference on Structures under Shock and Impact. Ponenencia presentada en ERES 2013 – 9th World Conference on Earthquake Resistant Engineering Structures, (2013, 8-10 de julio), La Coru-a (Spain).

(24) Manfredi, G. (2001). Evaluation of seismic energy demand. Earthquake Engineering and Structural Dynamics, 30(4): 485-499. http://dx.doi.org/10.1002/eqe.17

(25) Ministerio de Fomento. (2002). Norma de construcción sismorresistente NCSE-02. Boletín Oficial del Estado, nº 244. Madrid.

(26) CEN. (2004). European Standard EN 1998-1:2003. Eurocode 8: design of structures for earthquake resistance—Part 1: general rules, seismic actions and rules for buildings. Brussels: Comité Européen de Normaliation.

(27) Fardis, M.N. (2009) Seismic Design, Assessment and Retrofitting of Concrete Buildings. Londres: Ed. Springer. http://dx.doi.org/10.1007/978-1-4020-9842-0

(28) Ministerio de la vivienda. (1963). Norma de acciones en la edificación MV-101. Boletín Oficial del Estado, nº 35. Madrid.

(29) Ministerio de Fomento. (1968). Norma de construcción sismorresistente PGS-1 Parte A. Boletín Oficial del Estado, nº 30. Madrid.

(30) Ministerio de Fomento. (1974). Norma de construcción sismorresistente PDS-1 Parte A. Boletín Oficial del Estado nº 279. Madrid.

(31) Ministerio de Fomento. (1994). Norma de construcción sismorresistente NCSR-94. Boletín Oficial del Estado, nº33. Madrid.

(32) Ministerio de Fomento. (2008). Instrucción de hormigón estructural EHE-08. Boletín Oficial del Estado, nº203. Madrid.

(33) Vielma, J.C., Barbat, A.H., Oller, S. (2010). Seismic safety lf low ductility structures used in Spain. Bulletin of Earthquake Engineering, 8(1):135-155. http://dx.doi.org/10.1007/s10518-009-9127-4

(34) Astiz, M.A., Marí, A., Perepérez, B. (2005). Conceptos específicos del proyecto de estructuras en zonas sísmicas. Hormigón y acero, 237.

(35) Ricci, P., De Risi, M.T., Verderame, G.M., Manfredi, G. (2013). Influence of infill distribution and design typology on seismic performance of low- and mid-rise RC building. Bulleting of Earthquake Engineering, 11(5): 1585-1616. http://dx.doi.org/10.1007/s10518-013-9453-4

(36) De Luca, F., Verderame, G.M. (2013). A practice-oriented approach for the assessment of brittle failures in existing RC elements. Engineering Structures, 48:373-388. http://dx.doi.org/10.1016/j.engstruct.2012.09.038

(37) Feriche, M., Vidal, F., Alguacil, G., Navarro, M., Aranda, C. (2012). Vulnerabilidad y da-o en el terremoto de Lorca de 2011.En Actas de la 7ª Asamblea hispano-portuguesa de Geodesia y Geofísica. San Sebastián.

(38) Crowley, H., Pinho, R. (2010). Revisiting Eurocode 8 formulae for periods of vibration and their employment in linear seismic analysis. Earthquake Engineering and Structural Dynamics, 39(2):223-235.

(39) Navarro, M., García-Jerez, A., Alcalá, F.J., Vidal, F., Enomoto, T. (2012). Local site effect microzonation of Lorca town (southern Spain). Bulletin of Earthquake Engineering, 12(5): 1933-1959. http://dx.doi.org/10.1007/s10518-013-9491-y

(40) Galasso, C., Cosenza, E., Maddaloni, G. (2011). Statistical analysis of reinforcing steel properties for seismic design of RC structures. En Actas de la 14th European Conference on Earthquake Engineering. Ohrid, Macedonia.

(41) Borzi, B., Elnashai, A. (2000). Refined force reduction factor for seismic design. Engineering Structures, 22(10): 1244-1260. http://dx.doi.org/10.1016/S0141-0296(99)00075-9

(42) Fardis, M.N. (1997). Experimental and numerical investigations on the seismic response of RC infilled frames and recommendations for code provisions. En Report ECOEST-PREC8 nº 6. Prenormative research in support of Eurocode 8.

(43) CS.LL.PP. (2009). Istruzioni per l'applicazione delle norme tecniche delle costruzioni. Gazzetta Ufficiale della Repubblica Italiana, nº 47.

(44) Manfredi, G., Ricci, P., Verderame, G.M. (2012). Influence of Infill Panels and Their Distribution on Seismic Behavior of Existing Reinforced Concrete Buildings. The Open Construction and Building Technology Journal, 6(Suppl 1-M1): 236-253.

(45) Colangelo, F. (2012). A simple model to include fuzziness in the seismic fragility curve and relevant effect compared with randomness. Earthquake Engineering and Structural Dynamics, 41(5): 969-986. http://dx.doi.org/10.1002/eqe.1169

(46) Mainstone, R.J. (1970). On the stiffnesses and strengths of infilled frames. En Proceedings of the institution of civil engineering, IV:57-90.

(47) De Luca, F., Verderame, G.M., Manfredi, G. (2013). FAST vulnerability approach: a simple solution for damage assessment of RC infilled buildings. En Actas del Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics. Viena.

(48) De Luca F., Verderame, G.M., Gómez Martínez, F. (2013). Fast vulnerability approach: a simple solution for seismic reliability of RC infilled buildings. En Actas del XV Convegno della Associazione Nazionale Italiana di Ingegneria Sismica. Padua, Italia.

(49) Benavent-Climent, A., Cahís, X., Vico, J.M. (2010). Interior wide beam-column connections in existing RC frames subjected to lateral earthquake loading. Bulletin of Earthquake Engineering 8(2):401-420. http://dx.doi.org/10.1007/s10518-009-9144-3

(50) CEN. (2005). European Standard EN 1998-1:2005. Eurocode 8: design of structures for earthquake resistance-part 3: assessment and retrofitting of buildings. Comité Européen de Normalisation. Brussels.

Publicado

2015-03-30

Cómo citar

Gómez-Martínez, F., Pérez-García, A., De Luca, F., & Verderame, M. (2015). Comportamiento de los edificios de HA con tabiquería durante el sismo de Lorca de 2011: aplicación del método FAST. Informes De La Construcción, 67(537), e065. https://doi.org/10.3989/ic.12.110

Número

Sección

Artículos