Energy savings in the cement manufacture: last advances on pozzolanic additions
DOI:
https://doi.org/10.3989/ic.1986.v38.i385.1696Abstract
This work draws up the operational activities carried out in order to clear the problematic of the behaviour of Pozzolanic Additions -mixed cements made only of Portland Cement (Portland clinker is just a stronger setting regulator), P or PY and pozzolana, this one up to 40% in mass- facing the more or less selenitic means, so as the obtained deductions, conclusions and practical advices and the developed application areas till the end of this wide work (*) carried out in this Institute. It also emphasizes the far-reaching that the application of this work will have on Cement and Concrete industries.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1986 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
