Interaction graphs for steel H-sections subjected to bending, shear and axial forces
DOI:
https://doi.org/10.3989/ic.1996.v48.i443.1004Abstract
Interaction graphs are extensively used as a tool for designing prismatic member sections subjected to several combined stresses. For a long time, sets of these graphs are available in building technologies: reinforced concrete, steel and composite sections, under various stresses. This paper shows the general formulation for obtaining the graphs corresponding to bending, shear and axial forces of H-shaped steel sections. A general study of these stresses interaction limit surface is made, including a detailed description of its three regions, and the generation of interaction graphs corresponding to their sections by constant axial values.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1996 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
