Note relative to the determination of «bending lengths» in double-sloping metal portal frames
DOI:
https://doi.org/10.3989/ic.1980.v32.i325.2326Abstract
The author continues the development of the subject «Modern Timber Formwork», by summing up the comparative examination —already carried out in Part III of this Study— of the different types of glued timber existing on the market. In addition, the loads and stresses allowable for coniferous timber and the proposal for establishing Regulations for the Timber Section of the Research and Experimental Forestry Institute of Spain are given. In part V of the author's Study, published in this article, the important subject of the glues used for joining timber, a truly vital point in order to obtain louvered timber beams which are simply glued together, is approached.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1980 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
