Overpass bridging railway tracks - Cannes – France
DOI:
https://doi.org/10.3989/ic.1979.v32.i316.2391Abstract
This article describes the construction in Cannes of the third section of an overpass bridging a number of railway tracks and platforms, achieving the supression of many curves in the coastal highway and this without Interfering with city traffic. For this third section the construction method chosen was a metal structure, despite the fact that the two previous sections were built in concrete. This overpass section has 15 spans, 14 of them are solved with a grid of welded beams supporting reinforced concrete slabs while the remaining span is a grid of laminated beams on concrete. The total amount of steel used was 3360 Tm, aside from the foundations and decking reinforcements.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1979 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
