Motorway across Vienna Austria
DOI:
https://doi.org/10.3989/ic.1979.v32.i314.2409Abstract
The elevated stretch of the motorway crossing the city of Vienna in a North-South direction is the largest bridge in Austria. The bridge consists of a central span, the corresponding access ramps at the ends and a junction with a district highway having six separate roadways. The design and construction of the bridge was based on the principle of using the maximum amount of prefabricated parts in order to, on the one hand, achieve a higher constructive rationalization, and on the other, minimize erection time. Owing to its being inside the city, the bridge has been fitted with adequate lighting and runoff water disposal systems.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1979 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
