Collective Fall Protection for Construction Workers

Authors

  • A. C. Sulowski Sulowski Fall Protection, Inc.

DOI:

https://doi.org/10.3989/ic.12.035

Keywords:

Safety, fall protection, guardrails, construction sites

Abstract


Construction safety regulations require protection of workers against falls from elevations. The collective fall protection systems, in most cases, allow workers to move freely without wearing individual fall protection gear. The collective systems which prevent falls are preferred over the fall arrest systems. The latter are employed only if prevention of falls is not feasible. Arresting a fall always carries with it a residual risk of injury to the fall victim. The collective fall arrest systems are employed primarily during construction of electricity or telecomm towers. The aim of this paper has been a review of the collective FPS employed in the construction industry.

Downloads

Download data is not yet available.

References

(1) Sulowski, A. (2006). How Good is the 8kN Maximum Arrest Force Limit in Industrial Fall Arrest Systems? In International Fall Protection Symposium, Seattle.

(2) Sulowski, A., Amphoux, M. (1991). Fundamentals of Fall Protection. p.299, Toronto: International Society for Fall Protection.

(3) Sulowski, A. (2001). Fall Arrest Systems - Practical Essentials. Toronto: Canadian Standards Association.

(4) Sulowski, A., Small, G. (2011). Fall Protection for Engineers. Haan: BG BAU.

(5) Sulowski, A. (2000). Competent Trainer in Fall Protection. Toronto: Sulowski Fall Protection Inc.

(6) Ontario Regulations for Construction Projects, O.Reg 213/91, Toronto, 2006.

(7) CSA. (2009). Z259.13-04 (R2009) - Flexible horizontal lifeline systems. Mississauga, Ontario: Canadian Standards Association.

(8) CSA. (2009). Z259.16-04 (R2009) - Design of active fall-protection systems. Mississauga, Ontario: Canadian Standards Association.

(9) Gonzalez, M. N., Cobo, A., Fuente, J. V., Breso, S., Lozano, C. (2010). Comportamiento bajo cargas estaticas de sistemas provisionales de proteccion de borde realizados con elementos de acero. Informes de la Construccion, 63(521): 57-67. http://dx.doi.org/10.3989/ic.09.070

Published

2014-03-30

How to Cite

Sulowski, A. C. (2014). Collective Fall Protection for Construction Workers. Informes De La Construcción, 66(533), e009. https://doi.org/10.3989/ic.12.035

Issue

Section

Research Articles