Evaluation of the strenght of anchorages of facade scaffoldings

Authors

  • S. González-Rodrigo Universidad Politécnica de Madrid
  • F. González-Yunta Universidad Politécnica de Madrid
  • M. N. González-García Universidad Politécnica de Madrid

DOI:

https://doi.org/10.3989/ic.11.141

Keywords:

Anchors, scaffolding, masonry, safety, construction

Abstract


The resistance of the anchors to the facade of collective protection (CP) or building aids (MAE) is an essential point of the stability of these elements, which in many cases is unknown. There have been numerous studies on resistance and behavior of the braces to concrete structures. But hardly any studies analyzing the strength of masonry anchors, much less masonry with decades of service in real situations: buildings that have to intervene and must anchor CP and MAE to its factories.
In this study we have evaluated the pullout resistance of cancer plastic plugs inserted into staying in masonry building already built. The results were compared with those of other investigators and allowed to assess the requirements of the standard UNE-EN 12810-1 regarding the disposition and removal of scaffolding anchors to the facade.

Downloads

Download data is not yet available.

References

(1) FIB. (2007). Manuel del´ échafaudage. Paris: Syndicat Français del l´echafaudage du coffrage et de l´etaiement.

(2) Tamborero, J.M. (2004). Montaje y utilización de los andamios perimetrales fijos. Revista del INSHT, (32): 5-18.

(3) OSALAN. (2003). Guía práctica de andamios tubulares apoyados. Gobierno Vasco.

(4) García, J., Irles, R., Pomares, J.C. (2010, 26-29 de octubre). Mechanical behaviour of metal ties for security nets and IPE's. En XXXVII IAHS World Congress on Housing. Santander, España.

(5) García, J., Irles, R., Segovia, E., Pomares, J.C. (2008, 24-27 de noviembre). Definición de ensayos a realizar sobre anclajes de seguridad en redes y EPI's. En IV Congreso de la Asociación Científico-Técnica del Hormigón Estructural. Valencia, España.

(6) Cobo, A., González-Yunta, F., González-Rodrigo, S., González García, M.N. (2011, 16-18 de noviembre). Estudio de anclajes de andamios a fábricas de alba-ilería. En Workshop Investigación e Innovación en protecciones colectivas y medios auxiliares de edificación. Madrid, España.

(7) CEB. (1994). Fastenings to concrete and masonry structures. State of the art report. London: Thomas Telford Services Ltd.

(8) Fischerwerke. (1988). Untersuchungen an Rahmendübel S-RS in verschiedenen Mauerwerksarten (Auszug aus dem Prüfbericht).

(9) FMPA. (1977). Zulassungsversuche an Fischer S 10 H-R Dübeln in Mauerwerk aus Kreuzlochziegeln. Report S 13 008-1.

(10) FMPA. (1977). Untersuchungen des Tragverhaltens von Fischer-Gasbetondübeln GB 10, GB 14. Report S12 976.

(11) Planck, A. (1977). Bautechnische Einflüsse auf auf die Tragfähigkeit von Kunststoffdübeln in Mauerwerk. Baumaschine- Bautechnik, 6: 406-416.

(12) Ministerio de Empleo y Seguridad Social. (2012, 15 de marzo). Resolución de 28 de febrero de 2012, de la Dirección General de Empleo, por la que se registra y publica el V Convenio colectivo del sector de la construcción. Boletín Oficial del Estado, (64): 23837-23967.

(13) AENOR. (2003). UNE-EN 12810-1: 2003. Andamios de fachada de componentes prefabricados. Parte 1: Especificaciones de los productos. Asociación Española de Normalización (AENOR).

(14) AENOR. (2003). UNE-EN 12810-2: 2003. Andamios de fachada de componentes prefabricados. Parte 2: Métodos particulares de dise-o estructural. Asociación Española de Normalización (AENOR).

(15) AENOR. (2003). UNE-EN 12811-1: 2003. Equipamiento para trabajos temporales de obra. Parte 1: Andamios. Requisitos de comportamiento y de diseño general. Asociación Española de Normalización (AENOR).

(16) AENOR. (2004). UNE-EN 12811-2: 2004. Equipamiento para trabajos temporales de obra. Parte 2: Información sobre los materiales. Asociación Española de Normalización (AENOR).

(17) AENOR. (2002). UNE-EN 12811-3: 2002. Equipamiento para trabajos temporales de obra. Parte 3: Ensayos de carga. Asociación Española de Normalización (AENOR).

(18) AENOR. (1998). Andamios de servicios y de trabajo, con elementos prefabricados. Materiales, medidas, cargas de proyecto y requisitos de seguridad. Asociación Española de Normalización (AENOR).

Published

2014-03-30

How to Cite

González-Rodrigo, S., González-Yunta, F., & González-García, M. N. (2014). Evaluation of the strenght of anchorages of facade scaffoldings. Informes De La Construcción, 66(533), e013. https://doi.org/10.3989/ic.11.141

Issue

Section

Research Articles