Corporation Miranda, at Morón, Venezuela
DOI:
https://doi.org/10.3989/ic.1969.v22.i214.3662Abstract
This corporation manufacturers parts and accessories for the motor industry. The factory consists of three naves, a building with the bar and entrance control, and the pressing tools building. All the buildings were designed on a 5 x 5 m module, and allowance was made for possible extensions. Naves 1, 2 and 3 have hyperbolic paraboloid roof elements, of 10 x 10 m; the bar is covered with a 5 x 5 m inverted paraboloid. The pressing tools building has a metalic structure, and is separated from the other buildings to protect them from the vibrations produced by the pressing operations. Both the chosen site, the type of construction and other details have been carefully studied, and the overall result is correspondingly successful.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1969 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
