Results of butt and overlap welding, with elertrodes, applied to cold drawn steel reds
DOI:
https://doi.org/10.3989/ic.1969.v21.i208.3751Abstract
The authors report on a series of tests carried out in the welding of reinforced concrete bars. The tested bars were cold drawn, with elastic limits of 4,200 and 5,000 kg/cm2. The tests included butt and overlap welding, involving excentric and axial overlaps, with joint reinforcements. Results of these experiments show that if the indicated method is adopted, including an average standard of workmanship, the weld attains 100 % of the bar strength.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1969 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
