Caracterización de compuestos de escayola reforzados, en relación con el tipo de refuerzo y la relación A/Y

Alfonso García Santos

doi:10.3989/ic.2004.v56.i493.436

Characterization of reinforced scagliola compounds, related to the type of reinforcement and W/P ratio

Authors

Alfonso García Santos Dr. Arquitecto

DOI:

https://doi.org/10.3989/ic.2004.v56.i493.436

Abstract

This summary addresses the research conducted on scagliola reinforced with binary additions of fibres and polymer particles (patent P2001-02532 titled (in Spanish) “Scagliola or plaster tiles reinforced with binary additions of polypropylene fibres and melamine-formaldehyde particles”).
The very strong plaster or scagliola obtained with this type of reinforcement is very well suited for the manufacture of largescale prefabricated cladding such as used in construction. The material consists in a matrix of any type of plaster or scagliola, preferably scagliola E-35 or similar, along with binary additions of polypropylene filaments cut to a length of 25 mm and melamine formaldehyde particles .The percentage composition of the material, by weight of scagliola or plaster is shown below:
- 2% polypropylene fibre (25 mm long, diameter from 6 to 10 deniers)
- 0.5% of melamine formaldehyde particles (Melment F-10 or Melment L-10).
- Water/plaster ratio = 0.

Downloads

Download data is not yet available.

Author Biography

Alfonso García Santos, Dr. Arquitecto

Universidad Politécnica de Madrid
Profesor Titular del Departamento de Construcción y Tecnología Arquitectónicas.
Escuela Técnica Superior de Arquitectura de Madrid.

Downloads

Published

2004-10-30

How to Cite

García Santos, A. (2004). Characterization of reinforced scagliola compounds, related to the type of reinforcement and W/P ratio. Informes De La Construcción, 56(493), 19–31. https://doi.org/10.3989/ic.2004.v56.i493.436

Download Citation

Issue

Vol. 56 No. 493 (2004)

Section

Research Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.