Elevated tank for the Fiat Motorworks
DOI:
https://doi.org/10.3989/ic.1965.v18.i172.4360Abstract
At the Turin Fiat factory an elevated water tank has been built, with a capacity of 2,000 m3 60 m above the ground, and cup shaped. The structure is reinforced concrete, and prefabricated panels are used, which are supported by a concrete disc, a cylindrical crown and radial ribs. The whole rests on piles. The stem is 8 m in diameter, and has been constructed with the aid of U shaped cylindrical panels, 3 cm in thickness, which served as external formwork for the stem walls. These are 60 cm thick at the bottom, and 50 cm at the top. The tank itself is a paraboloid, made with triangular panels which together form conical circular rings. These also served as formwork, and were supported by a tubular scaffolding. An observation post has been built on top of the tank. It is 25 m in diameter, and is covered with a ribbed spherical cupola, supported by hinged columns, which allow radial deformations, which are not transmitted to the top ring of the tank. The latter, being full of water, is kept at a more uniform temperature than the cupular roof, which is fully exposed to the weather.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1965 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
