Renovation of electric installations in buildings used mainly as houses

Authors

  • J. C. Toledano Ldo. Ciencias Físicas. UCM
  • J. Mª. de las Casas
  • C. Bedoya

DOI:

https://doi.org/10.3989/ic.08.054

Keywords:

Buildings, Houses, Renovation, Electric installation, Regulations

Abstract


The objective of the present work is to report about the complexity of the renovation of the electric installation of a building, in the frame of a entire building renovation. We will also discuss the regulations that must be taken into account in the project and that the electrician will have to follow. During the design of the renovation of the electric installation of a building, it is necessary to consider what we want to renovate and which use will be given to the building afterwards. Further, the work must be intended for, at least, 30 to 50 years of utilization. We have also made a review of all the components of the connection installation in a building, applying regulations and way of implementation. About the interior electric equipment of housings, it is described the circuits that must be implemented in any case according to the low voltage regulation from 2002, presently in effect. These circuits fit out the buildings for the electrification currently needed in housings. The renovation works in electric installations require good management of the present regulations, both national and regional, and wide experience on how to apply them in each case. Note that the characteristics of the buildings must be preserved and the renovation work must not cause the building as a whole or its more significant parts to deteriorate.

Downloads

Download data is not yet available.

References

(1) González Tirados, R. (2008). Fuentes y Normas bibliográficas para trabajos de investigación. Madrid. ICE de la Universidad Politécnica. (paper).

(2) Ministerio de Industria (1973). Reglamento electrotécnico para baja tensión. Madrid. Editorial Paraninfo.

(3) Ministerio de Industria (2002). Reglamento electrotécnico para baja tensión. Madrid. Editorial Paraninfo.

(4) Ministerio de Industria (2007). Guía de aplicación del REBT. Madrid. Editorial Paraninfo.

(5) Sanz Serrano, J.L. (2008). Instalaciones eléctricas: esquemas, aplicaciones y ejercicios. 2ª edición. Madrid. Editorial Paraninfo.

(6) Sanz Serrano, J.L. (2008). Instalaciones eléctricas: soluciones a problemas en baja y alta tensión. 2ª edición. Madrid. Editorial Paraninfo.

(7) Sanz Serrano, J.L. y Toledano J.C. (2008). Técnicas y procesos en instalaciones eléctricas en media y baja tensión. 6ª edición. Madrid. Editorial Paraninfo.

(8) Toledano, J.C. (2004). Aplicaciones y experiencias en instalaciones domóticas de viviendas y pequeños establecimientos hoteleros. Informes de la Construcción, nº 494. pp. 47 – 55.

(9) Toledano, J.C. (2004). Instalaciones eléctricas en edificios destinados principalmente a viviendas. Energía, nº 177. pp 137 – 140.

(10) Toledano, J.C. (2007) “Aplicaciones y experiencias en viviendas domóticas”. Libro resumen de las jornadas sobre La Domótica como solución de futuro organizado por la Comunidad de Madrid. Dirección General de Industria. Madrid. pp 123 – 146.

(11) Toledano, J.C. y Martínez Requena, J.J. (2004). Puesta tierra en edificios y en instalaciones industriales. Madrid. Editorial Paraninfo.

(12) Toledano, J.C. y Sanz Serrano, J.L. (2008). Instalaciones eléctricas de enlace y centros de transformación.6ª edición. Madrid. Editorial Paraninfo.

(13) Trujillo, T. (2005). Manual de Inspección de las instalaciones eléctricas. 100 posibles fallos. Barcelona. Editorial Experiencia.

Downloads

Published

2009-12-30

How to Cite

Toledano, J. C., de las Casas, J. M., & Bedoya, C. (2009). Renovation of electric installations in buildings used mainly as houses. Informes De La Construcción, 61(516), 67–82. https://doi.org/10.3989/ic.08.054

Issue

Section

Research Articles