The Eurocode 9 "Design of aluminium structures"
DOI:
https://doi.org/10.3989/ic.1999.v51.i461.848Abstract
Aluminium is an interesting structural material because its lightness and minimum maintenance needs, together with and important strength. The lack of knowledge of design rules with this material owing to the shortage of design guides, together with its higher cost, are factors that leed to the very scarce use of aluminium in the construction of structures. In present article it is dealt with a brief look to the tipology and properties of the structural aluminium alloys, and it is described the content of Eurocode 9 "Design of aluminium structures", approved by CEN (European Committee for Standardization) in may 1998 that it is foreseen to be published in Spanish by AENOR in short time.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1999 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
