Comprobación de la longitud de pandeo, dada por la MV-103 de 1972, o por la E.A. 95, con la solución diferencial

Pedro Amondaráin Elícegui; Susana Villanueva Besga

doi:10.3989/ic.1998.v49.i453.918

Checking bulging length established by standards MV-103 and E.A. 95, with the differential solution

Authors

Pedro Amondaráin Elícegui Departamento Publicaciones
Susana Villanueva Besga

DOI:

https://doi.org/10.3989/ic.1998.v49.i453.918

Abstract

The bulging length by Standards MV-103 and E. A. 95 is studied and reckoned aiming the calculation and design of metallic structures. The study evidences the errors contained in Standards specially regarding coefficient β values.

Downloads

Download data is not yet available.

Downloads

Published

1998-02-28

How to Cite

Amondaráin Elícegui, P., & Villanueva Besga, S. (1998). Checking bulging length established by standards MV-103 and E.A. 95, with the differential solution. Informes De La Construcción, 49(453), 23–39. https://doi.org/10.3989/ic.1998.v49.i453.918

Download Citation

Issue

Vol. 49 No. 453 (1998)

Section

Research Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.